MaxxECU RACE H2O Plug-in STANDARD (Ford Focus RS/ST Mk2) ECU

Key specs

DBW = drive-by-wire throttle channels · λ wideband = onboard wideband lambda (oxygen sensor) inputs · CAN = controller area network buses.

Features

• ✓Drive-by-wire
• ✓Onboard wideband
• ✓Knock control
• ✓Flex fuel
• ✓Traction control
• ✓Launch control
• ✓Boost control
• ✓Gearbox control
• ✓Onboard logging
• ?Ethernet
• ✓USB
• ✕Built-in display

✓ published · ✕ not offered · ? not published. Some features, like traction control and launch control, mean different things by brand. See the glossary.

Details

Highlights

Fits: Ford Focus RS Mk2 2009-2011 (JZDA), Ford Focus RS500 Mk2 2010-2011 (JZDA), Ford Focus ST/ST225 Mk2 2005-2012 (HYDA), manual only. Kit includes the RACE H2O ECU, ME9.0 adapter harness, MAP fitting, USB cable, Bluetooth antenna and a quick guide; it uses the stock LSU 4.2 wideband. Focus ST: manual transmission only. Fits the Ford Focus only, not Volvo cars with the same T5 engine. The air mass meter (MAF) is removed; the built-in 400 kPa MAP sensor replaces it. Dash lights, tacho and clutch/speed signals run over the OEM CAN bus. OEM EGT sensors and fuel consumption output are not supported; 6 Type-K EGT inputs are in the harness. The store title says 2009-2010 and the harness is labelled 'Focus RS 2010'; MaxxECU's wiring manual lists ST models from 2005.

Software

MTune (free)

Logging

8 MB onboard, up to 1000 Hz

Links

Product page ↗

Fits

Ford Focus RS / ST

Tuning

Find a MaxxECU tuner with a dyno

Maker

MaxxECU: history, software and every model