Lexus IS300 standalone ECUs
Lexus's rear-wheel-drive compact sedan, the export version of the Altezza, using the 3.0-litre 2JZ-GE straight-six.
- Chassis
- XE10
- Years
- 2001–2005
- Engines
- 2JZ-GE VVTi
- Layout
- 6-cylinder, RWD
You have 2 plug-in ECU options for the Lexus IS300 from ECUMaster. The cheapest complete setup is ECUMaster at US$2,198 including the ECU. 55 wire-in ECUs can also run its 6-cylinder engine with a custom loom, from US$275.
Prices checked and include the ECU.
Your options for this car
New to this? Three ways to fit an aftermarket ECU explains each one in five minutes.
Dedicated plug-in 0
Built for this car. Goes where the factory ECU was and plugs straight into the factory loom.
None listed for this car.
Standalone + adapter harness 2
A general-purpose ECU with an off-the-shelf harness that joins it to the factory ECU plug.
From US$2,198 →
Wire-in ECU 55
Any ECU with the right features, on a new or rewired loom. Best for race cars, swaps and big changes from factory.
From US$275 plus loom →
Reflash
Keep the factory ECU and rewrite its tune. Usually the cheapest, keeps every factory feature, but limited to what the factory hardware can control.
Reflash options for this car are still being checked.
Plug-in ECUs for the Lexus IS300
2 options, cheapest first. Each one links to its full specs and sellers.
02-05 LEXUS IS300 & 02-05 GS300 PNP FOR EMU BLACK
Parallel harness; OEM ECU kept for auto trans and ETCS-i throttle
2001 LEXUS IS300 & 98-01 GS300 PNP FOR EMU BLACK
Parallel harness; OEM ECU kept for auto trans and ETCS-i throttle
No plug-in is listed for that chassis and year. A wire-in ECU below will still fit with a custom loom.
Wire-in ECUs that can run this engine
Cheapest current unit from each brand with at least 6 injector and ignition outputs, so it runs fully sequential.
Add a loom: built by your tuner or a loom maker. Filter every wire-in ECU by features and price
Find a tuner for these ECUs
Shops with their own dyno that tune the brands above.
About the makers: ECUMaster