Nissan Stagea standalone ECUs
Nissan's RB-powered wagon; the WC34 Autech 260RS used the GT-R's RB26DETT and all-wheel-drive system.
- Chassis
- WC34
- Years
- 1996–2001
- Engines
- RB26DETT · RB20DE / RB25DE / RB25DET (NEO and non-NEO) · RB25DET
- Layout
- 6-cylinder, AWD
You have 4 plug-in ECU options for the Nissan Stagea from Link and Haltech, 2 of them direct plug-in. The cheapest complete setup is Link at US$2,195 including the ECU. 55 wire-in ECUs can also run its 6-cylinder engine with a custom loom, from US$275.
Prices checked and include the ECU.
Your options for this car
New to this? Three ways to fit an aftermarket ECU explains each one in five minutes.
Dedicated plug-in 2
Built for this car. Goes where the factory ECU was and plugs straight into the factory loom.
From US$2,195 →
Standalone + adapter harness 2
A general-purpose ECU with an off-the-shelf harness that joins it to the factory ECU plug.
From US$2,490 →
Wire-in ECU 55
Any ECU with the right features, on a new or rewired loom. Best for race cars, swaps and big changes from factory.
From US$275 plus loom →
Reflash
Keep the factory ECU and rewrite its tune. Usually the cheapest, keeps every factory feature, but limited to what the factory hardware can control.
Reflash options for this car are still being checked.
Plug-in ECUs for the Nissan Stagea
4 options, cheapest first. Each one links to its full specs and sellers.
NGTTX Plug-In ECU (Nissan Skyline GT-T R34 RB25DET NEO)
Grey NEO ECU header; no 4WD (ATTESA) output signal; factory TCS disabled; E-throttle needs modification
NGTRX Plug-In ECU (Nissan GT-R, E-Throttle)
Blue ECU header (non-NEO); manual (auto: contact reseller); onboard MAP; E-throttle needs expansion connector; CANJST4 cable for CAN
HT-151358 Elite 2500 + Nissan Skyline R34 GT-T & Stagea WC34 Plug 'n' Play Adaptor Harness Kit
Manual only
No plug-in is listed for that chassis and year. A wire-in ECU below will still fit with a custom loom.
Wire-in ECUs that can run this engine
Cheapest current unit from each brand with at least 6 injector and ignition outputs, so it runs fully sequential.
Add a loom: built by your tuner or a loom maker. Filter every wire-in ECU by features and price
Find a tuner for these ECUs
Shops with their own dyno that tune the brands above.
About the makers: Link · Haltech